PAN PHILLIPS TRI-MET® THREAD FORMING SCREWS

for general plastics, sheet metal & aluminium

Large Pan Head TRI-MET®

Small Pan Head TRI-MET®

Thin Head TRI-MET®

Product Information

All measurements are in mm

			d		1.4	1.6	1.7	2	2.3	2.6
LARGE PAN TRI-MET®			D nominal		2.5	2.8	3.0	3.5	4.0	4.5
			H nominal		0.8	0.85	0.9	1.0	1.1	1.2
SMALL PAN TRI-MET®			D nominal		2.0	2.4	2.5	3.0	3.5	4.0
			H nominal		0.5	0.55	0.55	0.6	0.7	0.8
THIN HEAD TRI-MET®			D nominal		2.5	2.8	3.0	3.5	N/A	N/A
			H nominal		0.2	0.2	0.2	0.2	N/A	N/A
Driverbit for all threads					Wera Tools # 05135531001 or RS Components # 875-7509 check online

Recommended Hole Diameter *
Into Mild Steel					1.23	1.41	1.51	1.75	2.1	2.3
Into Aluminium					1.2	1.45	1.51	1.7	2.05	2.25
Into General Plastics					1.1	1.3	1.4	1.65	1.95	2.2
* For guidance purposes only

Length Ranges 'L'
Length Ranges					2-10	2-12	3-12	3-16	3-12	5-20
Longer or shorter lengths might be available from stock if required - please ask

Length Tolerance Information
Length Tolerances *
					3mm or less			+0/-0.15mm
					3.5mm to 10 mm			+0/-0.3mm
					10mm and longer			+0/-0.4mm
* All parts are made to the lower end of the tolerance band.

Materials Information
Standard Materials					Steel			Parts are plated either Zinc & Clear or Black or Nickel
All plating finishes are fully RoHS & REACH Compliant
Alternative materials on request *					Stainless			Stainless A2 equivilent or Magnetic Stainless
*Subject to 10,000 pcs MOQ and standard lead time of approx 12 working weeks
® Registered Product Trade Mark of Micro Fastenings Ltd